Glue CG 610 (A+B) Two Components with Nozzles (50ml)

€23.40
In stock
Only 5 left
SKU
AP5347253
  • Buy 2 for €22.23 each and save 5%
  • Buy 4 for €19.89 each and save 15%

CG 610 (A+B) two-component epoxy resin glue was specially developed for gluing crystals of very small sizes, starting with PP 0. Depending on the area of application the adhesive can be used for crystals up to the size of PP 14. CG 610 glue is a very flexible and extremely strong two-component Epoxy Resin adhesive, which has been especially developed for gluing Crystals. It has optimal adhesive characteristics for gluing with metal, glass, crystal, glue-able synthetic surfaces, rubber, wood, cork and porcelain. In addition, the mirrored surface of the crystal is protected against mechanical stress by the gentle build-up of adhesion, the optimized load transmission, and the maximum elasticity.

USEFUL INFORMATION:

1. Use a suitable dispenser to apply exactly the right amount of glue. Dispensers with a vacuum connection prevent the glue from dripping and reduce the amount of cleaning needed.
2. Be sure to use the exact recommended dosage and to carefully remove any excess glue using e.g. acetone or isopropyl alcohol.
3. It is recommended to complete the plating before gluing the crystals.
4. Follow the glue manufacturer’s mixing instructions.
5. If cleaning agents have affected the glue and/or the protective coating, use less solvent or a different type of solvent..
6. Re-work the original model to improve the cavity shape.
7. Make sure the glue has hardened before e.g. transporting the jewelry.

KEY FEATURES:

1. Suitable for very small crystals (starting with PP 0, up to PP 14).
2. Low viscosity allows an easier dosing of small glue quantities.
3. Cost saving due to long pot life (140 min.).

TECHNICAL DATA OF CG 610 (A+B):

Mixture ratio (A : B), by volume: 100 : 50 (resin : hardener)
Mixture ratio (A : B), by weight: 100 : 48 (resin : hardener)
Pot life at room temperature (23℃/73.4℉), quantity applied 1g: 140min.
Complete curing time at room temperature (23℃/73.4℉): 72h.
Complete curing time in oven (40℃/104℉): 18h.
Complete curing time in oven (80℃/176℉): 4h.
Complete curing time in oven (100℃/212℉): 1.5h.
Handling time at room temperature (23℃/73.4℉): 24h.
Viscosity (mixed): 1,750 +/- 250 mPa*s.
More Information
Country of ManufactureGermany
TypeGlue
ColorClear
Size50ml
Quantity in Pack1 piece
Barcode9009653472531